docs:interface:sidebar [OpenBuilds Documentation]

docs:interface:sidebar

OpenBuilds® Documentation
- OpenBuilds Interface
  - 1. OpenBuilds Interface - Product Tour
  - 2. Connect your Interface
    - 2.1.1 Prepare your BlackBox
      - Prepare BlackBox 4X v2.3 - v2.7
    - 2.1.2 Connect Interface to BlackBox
      - Connect Interface to BlackBox 4X
      - Connect Interface to BlackBox X32
  - 3. Initial Setup
    - 3.1 Firmware Update
      - Method 1: Update via CONTROL
      - Method 2: Update via the Internet/Wifi
      - Method 3: Update via USB Flashdrive
    - 3.2 Prepare USB Flash drive and Setup Wifi
  - 4. Usage Instructions:
    - 4.1 Run a Job
    - 4.2 Probing
    - 4.3 Configuration
    - 4.4 Upload Gcode over Wifi
  - 5. Frequently Asked Questions
    - 5.1 Format Flashdrive as FAT32
    - 5.2 Connect to other Grbl controllers
    - 5.3 Firmware Flashing Error: Not enough space / Flash too Small
    - 5.4 Run/Flash Jumper
    - 5.5 Device Test Mode
    - 5.6 Retrofit older Interfaces for X32
  - 6. Tips and Tricks
    - 6.1 Stacking your Interface onto your BlackBox

docs/interface/sidebar.txt · Last modified: 2025/01/16 20:00 by admin