-
-
- 2. Connect your Interface
- 2.1.1
Prepare your BlackBox - 2.1.2 Connect Interface to BlackBox
- 3. Initial Setup
- 3.1 Firmware Update
- Method 1: Update via CONTROL
- Method 2: Update via the Internet/Wifi
- Method 3: Update via USB Flashdrive
- 4. Usage Instructions:
- 4.1 Run a Job
- 4.2 Probing
- 4.3 Configuration
- 5. Frequently Asked Questions
- 5.4 Run/Flash Jumper
- 5.5 Device Test Mode
- 6. Tips and Tricks
-
Sidebar
docs:interface:fat32format
5.1 Format USB Flashdrive as FAT32
For optimal performance, you need a FAT32 formatted flashdrive. If you would like to reformat a flashdrive as FAT32, you can use the USB Disk Storage Format Tool:
Download the FAT32 GUIFormat Tool, and run it on your computer: Click here: guiformat.zip
Format your USB drive as FAT32
Once formatted, remember to Prepare your flashdrive for use with Interface
docs/interface/fat32format.txt · Last modified: 2024/10/17 13:56 by admin