-
-
- 1. Assembling BlackBox
- 2. Configuring BlackBox
- 2.1 Jumper Settings
- 2.2 Stepper Driver Settings
- 3. Connecting BlackBox
- 3.2 Connect Motors
- 3.3 Connect Tool
- 3.4 Connect Limit Switches
- 3.5 Connect Probe
- 4. Drivers and Software
- 5. Advanced Configurations
- 6. Frequently Asked Questions
-
Sidebar
docs:blackbox-4x:connect-3-wire-laser
3.3.2 Connecting BlackBox 4X to a 12v Laser Module
TIP: Remove the Relay Mode jumper to prevent the relay from clicking on/off rapidly during laser operations
If you would like to use both a Laser, and the IoT relay, See: Connecting both an IOT Switching Relay for a Router, and a Laser, to the BlackBox
docs/blackbox-4x/connect-3-wire-laser.txt · Last modified: 2022/08/19 17:26 (external edit)