3.3.1 Connecting BlackBox 4X to Dewalt DWP611 / RoutER11 Router via IOT Switching Relay Power Strip

You can install an IOT Relay to control your spindle using Gcode commands

M3 S1000 ; Turn Spindle On
M5 ; Turn Spindle Off

If you would like to use both a Laser, and the IoT relay, See: Connecting both an IOT Switching Relay for a Router, and a Laser, to the BlackBox Connection Diagram Video

docs/blackbox/connect-dewalt-iotrelay.txt Ā· Last modified: 2021/01/28 19:38 by admin