OpenBuilds Documentation

Part Store Documentation Software Community Support
sharkbits

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
sharkbits [2023/01/03 18:04]
ariel 		sharkbits [2024/08/05 15:15] (current)
Line 1: Line 1:
-{{:sharkbits_logo.png?nolink 1440x0|}}+{{:sharkbits_logo.png?nolink 800|}}
  ====== TOOL CHART ======   ====== TOOL CHART ====== 
  
-^SKU / Image ^Name ^Flutes ^Shank Diameter ^Cut Diameter ^Cutting Height ^Feed Rate ^Plunge Rate ^Cut Depth ^Degree ^Tip ^Overall Length ^Coating ^Best used for ^ + ===== Download this convenient chart to have it on hand ===== 
-^::: ^::: ^::: ^Inches / mm ^Inches / mm ^Inches / mm ^IPM / mm/s ^IPM / mm/s ^Inches / mm ^::: ^Inches / mm ^Inches / mm ^::: ^::: ^::: +
-|[[https://openbuildspartstore.com/3-flutes-solid-carbide-tapered-ball-nose-end-mill-1-32-diamond-carbon//|SB-603254-DC]]  \\ {{:sb-603254-dc.png?nolink|}} |3 Flute Ball Nose Solid Carbide Tapered 1/32" Diamond Carbon |3 |1/4" / 6.35 | |1" / 25.4 |40 / 1000 |20 / 500 |0.0078" / 0.198 | |1/32" / 0.8 |2 -1/2" / 63.5 |DC |Plastic, Soft Metals | +
-|[[https://openbuildspartstore.com/3-flutes-solid-carbide-tapered-ball-nose-end-mill-1-32-diamond-carbon//|SB-1018-DC]]  \\ {{:SB-1018-DC.png?nolink|}} |1 Flute Upcut Solid Carbide 1/8" Diamond Carbon |1 |1/4" / 6.35 |1/8" / 3.175 |5/16" / 7.9 |80 / 2000 |25 / 600 |0.0312" / 0.792 | | |2 -1/2" / 63.5 |10.5825 |0.0312" |0.79248 +
-|[[https://openbuildspartstore.com/upcut-single-flute-solid-carbide-end-mill-1-4-diamond-carbon//|SB-0514-DC]]  \\ {{:SB-0514-DC.png?nolink|}} |1 Flute Upcut Solid Carbide 1/4" Diamond Carbon |1 |1/4" / 6.35 |1/4" / 6.35 |3/4" / 19.5 |80 / 2000 |25 / 600 |0.0625" / 1.588 | | |2 -1/2" / 63.5 |10.5825 |0.0625" |1.5875 +
-|[[https://openbuildspartstore.com/upcut-2-flutes-solid-carbide-end-mill-1-8-diamond-carbonn//|SB-10518-DC]]  \\ {{:SB-10518-DC.png?nolink|}} |2 Flute Upcut Solid Carbide 1/8" Diamond Carbon |2 |1/4" / 6.35 |1/8" / 3.175 |1/2" / 12.7 |80 / 2000 |25 / 600 |0.03125" / 0.794 | | |2 -1/2" / 63.5 |10.5825 |0.03125" |0.79375 +
-|[[https://openbuildspartstore.com/upcut-2-flutes-solid-carbide-end-mill-1-4-diamond-carbon//|SB-1018-DC]]  \\ {{:SB-1018-DC.png?nolink|}} |2 Flute Upcut Solid Carbide 1/4" Diamond Carbon |2 |1/4" / 6.35 |1/4" / 6.35 |3/4" / 19.5 |80 / 2000 |25 / 600 |0.0625" / 1.588 | | |2 -1/2" / 63.5 |10.5825 |0.0625" |1.5875 +
-|[[https://openbuildspartstore.com/high-helix-3-flutes-solid-carbide-end-mill-1-4-diamond-carbon//|SB-7014-DC]]  \\ {{:SB-7014-DC.png?nolink|}} |3 Flute High Helix Solid Carbide 1/4" Diamond Carbon |3 |1/4" / 6.35 |1/4" / 6.35 |3/4" / 19.5 |80 / 2000 |25 / 600 |0.0625" / 1.588 | | |2 -1/2" / 63.5 |10.5825 |0.0625" |1.5875 +
-|[[https://openbuildspartstore.com/3-flutes-solid-carbide-tapered-ball-nose-1-32//|SB-603254-NS]]  \\ {{:SB-603254-NS.png?nolink|}} |3 Flute Solid Carbide Tapered Ball Nose 1/32" Nano Shield |3 |1/4" / 6.35 | |1" / 25.4 |40 / 1000 |20 / 500 |0.0078" / 0.198 | |1/32" / 0.8 |2 -1/2" / 63.5 |8.466 |0.0078" |0.19812 +
-|[[https://openbuildspartstore.com/upcut-2-flute-solid-carbide-ball-nose-1-16-nano-shield//|SB-501654-NS]]  \\ {{:SB-501654-NS.png?nolink|}} |3 Flute Solid Carbide Tapered Ball Nose 1/16" Nano Shield |3 |1/4" / 6.35 | |1" / 25.4 |40 / 1000 |20 / 500 |0.0039" / 0.099 | |1/16" / 1.6 |2 -1/2" / 63.5 |8.466 |0.0039" |0.09906 +
-|[[https://openbuildspartstore.com/3-flutes-solid-carbide-tapered-ball-nose-end-mill-1-32-diamond-carbon//|SB-8516-NS]]  \\ {{:SB-8516-NS.png?nolink|}} |2 Flute Upcut Solid Carbide Ball Nose 1/16" Nano Shield |2 |1/4" / 6.35 |1/16" / 1.58 |1/4" / 6.4 |30 / 750 |10 / 250 |0.0154" / 0.391 | | |2 -1/2" / 63.5 |4.233 |0.0154" |0.39116 +
-|[[https://openbuildspartstore.com/upcut-2-flutes-solid-carbide-ball-nose-end-mill-1-8-nano-shield//|SB-1518-NS]]  \\ {{:SB-1518-NS.png?nolink|}} |2 Flute Upcut Solid Carbide Ball Nose 1/8" Nano Shield |2 |1/4" / 6.35 |1/8" / 3.175 |1/2" / 12.7 |50 / 1300 |15 / 375 |0.0312" / 0.794 | | |2 -1/2" / 63.5 |6.3495 |0.03125" |0.79375 +
-|[[https://openbuildspartstore.com/upcut-2-flutes-solid-carbide-ball-nose-end-mill-1-4-nano-shieldn//|SB-9014-NS]]  \\ {{:SB-9014-NS.png?nolink|}} |2 Flute Upcut Solid Carbide Ball Nose 1/4" Nano Shield |2 |1/4" / 6.35 |1/4" / 6.35 |1/2" / 12.7 |50 / 1300 |15 / 375 |0.0625" / 1.588 | | |2 -1/2" / 63.5 |6.3495 |0.0625" |1.5875 +
-|[[https://openbuildspartstore.com/down-cut-2-flutes-solid-carbide-end-mill-1-4//|SB-2014-NS]]  \\ {{:SB-2014-NS.png?nolink|}} |2 Flute Downcut Solid Carbide 1/4" Nano Shield |2 |1/4" / 6.35 |1/4" / 6.35 |3/4" / 25.4 |80 / 2000 |25 / 600 |0.0625" / 1.588 | | |2 -1/2" / 63.5 |10.5825 |0.0625" |1.5875 +
-|[[https://openbuildspartstore.com/down-cut-2-flutes-solid-carbide-end-mill-1-8//|SB-2518-NS]]  \\ {{:SB-2518-NS.png?nolink|}} |2 Flute Downcut Solid Carbide 1/8" Nano Shield |2 |1/4" / 6.35 |1/8" / 3.175 |1/2" / 12.7 |80 / 2000 |25 / 600 |0.0312" / 0.794 | | |2 -1/2" / 63.5 |10.5825 |0.03125" |0.79375 +
-|[[https://openbuildspartstore.com/diamond-cutter-10-flutes-carbon-fiber-solid-carbide//|SB-6518-NS]]  \\ {{SB-6518-NS.png?nolink|}} |10 Flute Diamond Cutter Carbon Fiber Solid Carbide Nano Shield |10 |1/4" / 6.35 |1/8" / 3.18 |3/4" / 19.5 |60 / 1500 |30 / 750 |0.0312" / 0.794 | | |2 -1/2" / 63.5 |12.699 |0.03125" |0.79375 +
-|[[https://openbuildspartstore.com/straight-2-flutes-solid-carbide-end-mill-1-4-nano-shield//|SB-10014-NS]]  \\ {{SB-10014-NS.png?nolink|}} |2 Flute Straight Solid Carbide 1/4" Nano Shield |2 |1/4" / 6.35 |1/4" / 6.35 |3/4" / 19.5 |80 / 2000 |25 / 600 |0.0625" / 1.588 | | |2 -1/2" / 63.5 |10.5825 |0.0625" |1.5875 +
-|[[https://openbuildspartstore.com/straight-2-flutes-solid-carbide-end-mill-1-8-nano-shield//|SB-9518-NS]]  \\ {{:SB-9518-NS.png?nolink|}} |2 Flute Straight Solid Carbide 1/8" Nano Shield |2 |1/4" / 6.35 |1/8" / 3.175 |1/2" / 12.7 |80 / 2000 |25 / 600 |0.0312" / 0.794 | | |2 -1/2" / 63.5 |10.5825 |0.03125" |0.79375 +
-|[[https://openbuildspartstore.com/2-flute-compression-solid-carbide-bit-1-4-nano-shield//|SB-8014-NS]]  \\ {{:SB-8014-NS.png?nolink|}} |2 Flute Compression Solid Carbide Bit 1/4" Nano Shield |2 |1/4" / 6.35 |1/4" / 6.35 |7/8" / 22.2 |40 / 1000 |20 / 500 |0.0625" / 1.588 | | |2 -1/2" / 63.5 |8.466 |0.0625" |1.5875 +
-|[[https://openbuildspartstore.com/engraving-bit-solid-carbide-30-degree//|SB-4000530-NS]]  \\ {{:SB-4000530-NS.png?nolink|}} |Engraving Bit Solid Carbide 30 Degree | |1/4" / 6.35 | |0.440" / 11.2 |40 / 1000 |20 / 500 |0.1" / 2.540 |30 |0.005" / 0.1 |2 -1/4" / 57.15 |8.466 |0.1" |2.54 +
-|[[https://openbuildspartstore.com/engraving-bit-solid-carbide-45-degree//|SB-4502545-NS]]  \\ {{:SB-4502545-NS.png?nolink|}} |Engraving Bit Solid Carbide 45 Degree | |1/4" / 6.35 | |0.272" / 7.0 |40 / 1000 |20 / 500 |0.003" / 0.079 |45 | |2 -1/4" / 57.15 |8.466 |0.0031" |0.07874 +
-|[[https://openbuildspartstore.com/3-flutes-solid-carbide-tapered-ball-nose-end-mill-1-32-diamond-carbon//|SB-11514-NS]]  \\ {{:SB-11514-NS.png?nolink|}} |3 Flute V Groove Solid Carbide 60 Degree 1/4" Nano Shield |3 |1/4" / 6.35 |1/4" / 6.35 |7/32" / 5.6 |40 / 1000 |20 / 500 |0.0625" / 1.588 |60 | |2" / 50.8 |8.466 |0.0625" |1.5875 +
-|[[https://openbuildspartstore.com/2-flutes-v-groove-solid-carbide-60-degree//|SB-3060]]  \\ {{:SB-3060.png?nolink|}} |2 Flute V Groove Solid Carbide 60 Degree |2 |1/4" / 6.35 |1/2" / 12.7 |7/16" / 11.1 |40 / 1000 |20 / 500 |0.125" / 3.175 |60 | |2" / 50.8 |8.466 |0.125" |3.175 +
-|[[https://openbuildspartstore.com/2-flutes-v-groove-solid-carbide-90-degree//|SB-3590]]  \\ {{:SB-3590.png?nolink|}} |2 Flute V Groove Solid Carbide 90 Degree |2 |1/4" / 6.35 |1/2" / 12.7 |3/8" / 9.5 |40 / 1000 |20 / 500 |0.125" / 3.175 |90 | |2" / 50.8 |8.466 |0.125" |3.175 +
-|[[https://openbuildspartstore.com/3-flute-surfacing-bit//|SB-7510]]  \\ {{:SB-7510.png?nolink|}} |3 Flute Surfacing Bit 1" |3 |1/4" / 6.35 |1" / 25.4 |17/64" / 6.7 |80 / 2000 |25 / 600 |0.06" / 1.524 | | |1-21/32" / 42.07 |10.5825 |0.06" |1.524+
  
 +[[https://docs.openbuilds.com/lib/exe/fetch.php?media=sharkbits_tool_chart_v4.pdf|{{:docs:blackbox-4x:download-button.png?200|}}]]
  
- === *Please note that default settings are to be adjusted according to what material, speeds/feedsthat you are using. Use theses libraries as a starting point for your projects. Use at your own risk. ===  + 
-Download this convenient chart to have it on hand {{ :sharkbits_tool_chart_v4.pdf |}}+ 
 + 
 + 
 +^SKU / Image ^Name ^Flutes ^Shank Diameter ^Cut Diameter ^Cutting Height ^Feed Rate ^Plunge Rate ^Cut Depth ^Degree ^Tip ^Overall Length ^Coating ^Best used for ^ 
 +|[[https://openbuildspartstore.com/3-flutes-solid-carbide-tapered-ball-nose-end-mill-1-32-diamond-carbon//|SB-1018-DC]]  \\ {{:SB-1018-DC.png?nolink|}} |1 Flute Upcut Solid Carbide 1/8" Diamond Carbon |1 |1/4" / 6.35mm |1/8" / 3.175mm |5/16" / 7.9mm |80IPM / 2000mm/min |25IPM / 600mm/min |0.0312" / 0.792mm | | |2 -1/2" / 63.5mm |DC |Plastic, Soft Metals | 
 +|[[https://openbuildspartstore.com/upcut-single-flute-solid-carbide-end-mill-1-4-diamond-carbon//|SB-0514-DC]]  \\ {{:SB-0514-DC.png?nolink|}} |1 Flute Upcut Solid Carbide 1/4" Diamond Carbon |1 |1/4" / 6.35mm |1/4" / 6.35mm |3/4" / 19.5mm |80IPM / 2000mm/min |25IPM / 600mm/min |0.0625" / 1.588mm | | |2 -1/2" / 63.5mm |DC |Plastic, Soft Metals | 
 +|[[https://openbuildspartstore.com/upcut-2-flutes-solid-carbide-end-mill-1-8-diamond-carbonn//|SB-10518-DC]]  \\ {{:SB-10518-DC.png?nolink|}} |2 Flute Upcut Solid Carbide 1/8" Diamond Carbon |2 |1/4" / 6.35mm |1/8" / 3.175mm |1/2" / 12.7mm |80IPM / 2000mm/min |25IPM / 600mm/min |0.03125" / 0.794mm | | |2 -1/2" / 63.5mm |DC |Plastic, Soft Metals | 
 +|[[https://openbuildspartstore.com/upcut-2-flutes-solid-carbide-end-mill-1-4-diamond-carbon//|SB-1018-DC]]  \\ {{:SB-1018-DC.png?nolink|}} |2 Flute Upcut Solid Carbide 1/4" Diamond Carbon |2 |1/4" / 6.35mm |1/4" / 6.35mm |3/4" / 19.5mm |80IPM / 2000mm/min |25IPM / 600mm/min |0.0625" / 1.588mm | | |2 -1/2" / 63.5mm |DC |Plastic, Soft Metals | 
 +|[[https://openbuildspartstore.com/high-helix-3-flutes-solid-carbide-end-mill-1-4-diamond-carbon//|SB-7014-DC]]  \\ {{:SB-7014-DC.png?nolink|}} |3 Flute High Helix Solid Carbide 1/4" Diamond Carbon |3 |1/4" / 6.35mm |1/4" / 6.35mm |3/4" / 19.5mm |80IPM / 2000mm/min |25IPM / 600mm/min |0.0625" / 1.588mm | | |2 -1/2" / 63.5mm |DC |Plastic, Soft Metals | 
 +|[[https://openbuildspartstore.com/3-flutes-solid-carbide-tapered-ball-nose-end-mill-1-32-diamond-carbon//|SB-8516-NS]]  \\ {{:SB-8516-NS.png?nolink|}} |2 Flute Upcut Solid Carbide Ball Nose 1/16" Nano Shield |2 |1/4" / 6.35mm |1/16" / 1.58mm |1/4" / 6.35mm |30IPM / 750mm/min |10IPM / 250mm/min |0.0154" / 0.391mm | | |2 -1/2" / 63.5mm |NS |Wood | 
 +|[[https://openbuildspartstore.com/upcut-2-flutes-solid-carbide-ball-nose-end-mill-1-8-nano-shield//|SB-1518-NS]]  \\ {{:SB-1518-NS.png?nolink|}} |2 Flute Upcut Solid Carbide Ball Nose 1/8" Nano Shield |2 |1/4" / 6.35mm |1/8" / 3.175mm |1/2" / 12.7mm |50IPM / 1300mm/min |15IPM / 375mm/min |0.0312" / 0.794mm | | |2 -1/2" / 63.5mm |NS |Wood | 
 +|[[https://openbuildspartstore.com/upcut-2-flutes-solid-carbide-ball-nose-end-mill-1-4-nano-shieldn//|SB-9014-NS]]  \\ {{:SB-9014-NS.png?nolink|}} |2 Flute Upcut Solid Carbide Ball Nose 1/4" Nano Shield |2 |1/4" / 6.35mm |1/4" / 6.35mm |1/2" / 12.7mm |50IPM / 1300mm/min |15IPM / 375mm/min |0.0625" / 1.588mm | | |2 -1/2" / 63.5mm |NS |Wood | 
 +|[[https://openbuildspartstore.com/down-cut-2-flutes-solid-carbide-end-mill-1-4//|SB-2014-NS]]  \\ {{:SB-2014-NS.png?nolink|}} |2 Flute Downcut Solid Carbide 1/4" Nano Shield |2 |1/4" / 6.35mm |1/4" / 6.35mm |3/4" / 25.4mm |80IPM / 2000mm/min |25IPM / 600mm/min |0.0625" / 1.588mm | | |2 -1/2" / 63.5mm |NS |Wood | 
 +|[[https://openbuildspartstore.com/down-cut-2-flutes-solid-carbide-end-mill-1-8//|SB-2518-NS]]  \\ {{:SB-2518-NS.png?nolink|}} |2 Flute Downcut Solid Carbide 1/8" Nano Shield |2 |1/4" / 6.35mm |1/8" / 3.175mm |1/2" / 12.7mm |80IPM / 2000mm/min |25IPM / 600mm/min |0.0312" / 0.794mm | | |2 -1/2" / 63.5mm |NS |Wood | 
 +|[[https://openbuildspartstore.com/diamond-cutter-10-flutes-carbon-fiber-solid-carbide//|SB-6518-NS]]  \\ {{SB-6518-NS.png?nolink|}} |10 Flute Diamond Cutter Carbon Fiber Solid Carbide Nano Shield |10 |1/4" / 6.35mm |1/8" / 3.175mm |3/4" / 19.5mm |60IPM / 1500mm/min |30IPM / 750mm/min |0.0312" / 0.794mm | | |2 -1/2" / 63.5mm |NS |Carbon Fiber | 
 +|[[https://openbuildspartstore.com/straight-2-flutes-solid-carbide-end-mill-1-4-nano-shield//|SB-10014-NS]]  \\ {{SB-10014-NS.png?nolink|}} |2 Flute Straight Solid Carbide 1/4" Nano Shield |2 |1/4" / 6.35mm |1/4" / 6.35mm |3/4" / 19.5mm |80IPM / 2000mm/min |25IPM / 600mm/min |0.0625" / 1.588mm | | |2 -1/2" / 63.5mm |NS |Plastic | 
 +|[[https://openbuildspartstore.com/straight-2-flutes-solid-carbide-end-mill-1-8-nano-shield//|SB-9518-NS]]  \\ {{:SB-9518-NS.png?nolink|}} |2 Flute Straight Solid Carbide 1/8" Nano Shield |2 |1/4" / 6.35mm |1/8" / 3.175mm |1/2" / 12.7mm |80IPM / 2000mm/min |25IPM / 600mm/min |0.0312" / 0.794mm | | |2 -1/2" / 63.5mm |NS |Plastic | 
 +|[[https://openbuildspartstore.com/2-flute-compression-solid-carbide-bit-1-4-nano-shield//|SB-8014-NS]]  \\ {{:SB-8014-NS.png?nolink|}} |2 Flute Compression Solid Carbide Bit 1/4" Nano Shield |2 |1/4" / 6.35mm |1/4" / 6.35mm |7/8" / 22.2mm |40IPM / 1000mm/min |20IPM / 500mm/min |0.0625" / 1.588mm | | |2 -1/2" / 63.5mm |NS |Laminates | 
 +|[[https://openbuildspartstore.com/engraving-bit-solid-carbide-30-degree//|SB-4000530-NS]]  \\ {{:SB-4000530-NS.png?nolink|}} |Engraving Bit Solid Carbide 30 Degree |1 |1/4" / 6.35mm | |0.440" / 11.2mm |40IPM / 1000mm/min |20IPM / 500mm/min |0.004" / 0.1mm |30° |0.005" / 0.1mm |2 -1/4" / 57.15mm |NS |Plastic, Wood, Soft Metal | 
 +|[[https://openbuildspartstore.com/engraving-bit-solid-carbide-45-degree//|SB-4502545-NS]]  \\ {{:SB-4502545-NS.png?nolink|}} |Engraving Bit Solid Carbide 45 Degree |1 |1/4" / 6.35mm | |0.272" / 7.0mm |40IPM / 1000mm/min |20IPM / 500mm/min |0.003" / 0.079mm |45° |0.025" / 0.05mm |2 -1/4" / 57.15mm |NS |Plastic, Wood, Soft Metal | 
 +|[[https://openbuildspartstore.com/3-flutes-solid-carbide-tapered-ball-nose-end-mill-1-32-diamond-carbon//|SB-11514-NS]]  \\ {{:SB-11514-NS.png?nolink|}} |3 Flute V Groove Solid Carbide 60 Degree 1/4" Nano Shield |3 |1/4" / 6.35mm |1/4" / 6.35mm |7/32" / 5.6mm |40IPM / 1000mm/min |20IPM / 500mm/min |0.0625" / 1.588mm |60° | |2" / 50.8mm |NS |Wood | 
 +|[[https://openbuildspartstore.com/2-flutes-v-groove-solid-carbide-60-degree//|SB-3060]]  \\ {{:SB-3060.png?nolink|}} |2 Flute V Groove Solid Carbide 60 Degree |2 |1/4" / 6.35mm |1/2" / 12.7mm |7/16" / 11.1mm |40IPM / 1000mm/min |20IPM / 500mm/min |0.125" / 3.175mm |60° | |2" / 50.8mm |N/A |Wood | 
 +|[[https://openbuildspartstore.com/2-flutes-v-groove-solid-carbide-90-degree//|SB-3590]]  \\ {{:SB-3590.png?nolink|}} |2 Flute V Groove Solid Carbide 90 Degree |2 |1/4" / 6.35mm |1/2" / 12.7mm |3/8" / 9.5mm |40IPM / 1000mm/min |20IPM / 500mm/min |0.125" / 3.175mm |90° | |2" / 50.8mm |N/A |Wood | 
 +|[[https://openbuildspartstore.com/3-flutes-solid-carbide-tapered-ball-nose-end-mill-1-32-diamond-carbon//|SB-603254-DC]]  \\ {{:sb-603254-dc.png?nolink|}} |3 Flute Ball Nose Solid Carbide Tapered 1/32" Diamond Carbon |3 |1/4" / 6.35mm | |1" / 25.4mm |40IPM / 1000mm/min |20IPM / 500mm/min |0.0078" / 0.198mm |6.2° |1/32" / 0.8mm |2 -1/2" / 63.5mm |DC |Plastic, Soft Metals | 
 +|[[https://openbuildspartstore.com/3-flutes-solid-carbide-tapered-ball-nose-1-32//|SB-603254-NS]]  \\ {{:SB-603254-NS.png?nolink|}} |3 Flute Solid Carbide Tapered Ball Nose 1/32" Nano Shield |3 |1/4" / 6.35mm | |1" / 25.4mm |40IPM / 1000mm/min |20IPM / 500mm/min |0.0078" / 0.198mm |6.2° |1/32" / 0.8mm |2 -1/2" / 63.5mm |NS |Wood | 
 +|[[https://openbuildspartstore.com/upcut-2-flute-solid-carbide-ball-nose-1-16-nano-shield//|SB-501654-NS]]  \\ {{:SB-501654-NS.png?nolink|}} |3 Flute Solid Carbide Tapered Ball Nose 1/16" Nano Shield |3 |1/4" / 6.35mm | |1" / 25.4mm |40IPM / 1000mm/min |20IPM / 500mm/min |0.0039" / 0.099mm |5.4° |1/16" / 1.6mm |2 -1/2" / 63.5mm |NS |Wood | 
 +|[[https://openbuildspartstore.com/3-flute-surfacing-bit//|SB-7510]]  \\ {{:SB-7510.png?nolink|}} |3 Flute Surfacing Bit 1" |3 |1/4" / 6.35mm |1" / 25.4mm |17/64" / 6.7mm |80IPM / 2000mm/min |25IPM / 600mm/min |0.06" / 1.524mm | | |1-21/32" / 42.07mm |N/A |Wood | 
 + 
 + 
 + === *Please note that default settings are to be adjusted according to what material, speeds/feeds that you are using. Use theses libraries as a starting point for your projects. Use at your own risk. === 
sharkbits.1672769067.txt.gz · Last modified: 2024/08/05 15:15 (external edit)

Page Tools

All works Copyright © by OpenBuilds®, LLC
All rights reserved. This Documentation or any portion thereof including but not limited to (menu structures, images, layout, videos, graphical artwork, logos, names, trademarks, etc.) may not be reproduced or used in any manner whatsoever without the express written permission of OpenBuilds, LLC