Differences

This shows you the differences between two versions of the page.

--- docs:software:fusion360 [2024/12/29 07:15]
admin
+++ docs:software:fusion360 [2024/12/29 07:18] (current)
admin
@@ Line 1: / Line 1: @@
-===== Fusion 360 Post Processor to support OpenBuilds BlackBox and OpenBuilds Machines =====
+====== Fusion 360 Post Processor to support OpenBuilds BlackBox and OpenBuilds Machines ======
+===== 1. Install the OpenBuilds Fusion 360 Post Processor =====
 You can use Fusion 360 to generate G-Code for your machine. Simply install the correct Post Processor :
-==== 1. Download our OpenBuilds Fusion 360 Post Processor (.cps file) ====
+==== 1.1 Download our OpenBuilds Fusion 360 Post Processor (.cps file) ====
 [[https://github.com/OpenBuilds/OpenBuilds-Fusion360-Postprocessor/archive/master.zip|{{:docs:blackbox-4x:download-button.png?nolink&200}}]]
-==== 2. Copy the Post Processor file to your Cloud Library ====
+==== 1.2 Copy the Post Processor file to your Cloud Library ====
-=== 2.1 Enable Cloud Libraries ===
+=== 1.2.1 Enable Cloud Libraries ===
 Click on your Name in the top-right corner, and then on Preferences:
@@ Line 19: / Line 21: @@
 {{:docs:software:enable_cloud_libraries.png?400}}
-=== 2.2 Upload the downloaded OpenbuildsFusion360PostGrbl.cps file to Assets > CAMPosts ===
+=== 1.2.2 Upload the downloaded OpenbuildsFusion360PostGrbl.cps file to Assets > CAMPosts ===
 Open your Assets library
@@ Line 33: / Line 35: @@
 {{:docs:software:upload.png?600}}
-==== 3. Use the OpenBuilds Postprocessor when you Post from Fusion 360 ====
+==== 1.3 Use the OpenBuilds Postprocessor when you Post from Fusion 360 ====
 Proceed to setup your CAD/Toolpaths as you would normally, generate the Toolpaths, and then Post Process:
-=== 3.1 Post: Use Cloud Posts
+=== 1.3.1 Post: Use Cloud Posts
 Click Setup > Use Cloud Posts
@@ Line 43: / Line 45: @@
 {{:docs:software:use_cloud_posts.png}}
-=== 3.2 Select the Post Processor ===
+=== 1.3.2 Select the Post Processor ===
 Select the Post Processor from the dropdown menu:
@@ Line 49: / Line 51: @@
 {{:docs:software:fusion-post-list.png?600}}
-=== 3.3 Customise Post Parameters (optional) ===
+=== 1.3.3 Customise Post Parameters (optional) ===
 There are several parameters you can adjust to your choosing to tweak the behaviour and features of the Post
@@ Line 59: / Line 61: @@
 {{:docs:software:speed_dial.png}}
+===== 2. Generating Plasma Gcode =====
+Checkout the Plasma Readme at https://github.com/OpenBuilds/OpenBuilds-Fusion360-Postprocessor/blob/master/README-plasma.md
+===== 3. Generating and Simulating 4-Axes Gcode =====
+{{youtube>zaUeO4gNpmM?large|Generating and Simulating 4-Axes Gcode}}

OpenBuilds Documentation

Differences

Page Tools