docs:software:fusion360

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
docs:software:fusion360 [2020/10/05 19:46]
admin
docs:software:fusion360 [2024/12/29 07:18] (current)
admin
Line 1: Line 1:
-===== Fusion 360 Post Processor to support OpenBuilds BlackBox and OpenBuilds Machines =====+====== Fusion 360 Post Processor to support OpenBuilds BlackBox and OpenBuilds Machines ====== 
 + 
 +===== 1. Install the OpenBuilds Fusion 360 Post Processor =====
  
 You can use Fusion 360 to generate G-Code for your machine. Simply install the correct Post Processor : You can use Fusion 360 to generate G-Code for your machine. Simply install the correct Post Processor :
  
-==== 1.  Download our OpenBuilds Fusion 360 Post Processor (.cps file) ====+==== 1.Download our OpenBuilds Fusion 360 Post Processor (.cps file) ====
  
-[[https://github.com/OpenBuilds/OpenBuilds-Fusion360-Postprocessor/archive/master.zip|{{:docs:blackbox:download-button.png?200|}}]]+[[https://github.com/OpenBuilds/OpenBuilds-Fusion360-Postprocessor/archive/master.zip|{{:docs:blackbox-4x:download-button.png?nolink&200}}]]
  
-==== 2. Copy the Post Processor file to your Cloud Library ====+==== 1.Copy the Post Processor file to your Cloud Library ====
  
-=== 2.1 Enable Cloud Libraries ===+=== 1.2.1 Enable Cloud Libraries ===
  
 Click on your Name in the top-right corner, and then on Preferences: Click on your Name in the top-right corner, and then on Preferences:
  
-{{:docs:software:preferences.png|}}+{{:docs:software:preferences.png}}
  
 Click on **Manufacturing** on the left, and then make sure the checkmark is set next to **Enable Cloud Libraries** Click on **Manufacturing** on the left, and then make sure the checkmark is set next to **Enable Cloud Libraries**
  
-{{:docs:software:enable_cloud_libraries.png?400|}}+{{:docs:software:enable_cloud_libraries.png?400}}
  
-=== 2.2 Upload the downloaded OpenbuildsFusion360PostGrbl.cps file to Assets > CAMPosts ===+=== 1.2.2 Upload the downloaded OpenbuildsFusion360PostGrbl.cps file to Assets > CAMPosts ===
  
 Open your Assets library Open your Assets library
  
-{{:docs:software:assets-folder.png?400|}}+{{:docs:software:assets-folder.png?400}}
  
 Go into the CAMPosts folder Go into the CAMPosts folder
  
-{{:docs:software:assets-camposts.png?400|}}+{{:docs:software:assets-camposts.png?400}}
  
 Click Upload, select the downloaded OpenbuildsFusion360PostGrbl.cps file and Upload it Click Upload, select the downloaded OpenbuildsFusion360PostGrbl.cps file and Upload it
  
-{{:docs:software:upload.png?600|}}+{{:docs:software:upload.png?600}}
  
-==== 3. Use the OpenBuilds Postprocessor when you Post from Fusion 360 ====+==== 1.Use the OpenBuilds Postprocessor when you Post from Fusion 360 ====
  
 Proceed to setup your CAD/Toolpaths as you would normally, generate the Toolpaths, and then Post Process: Proceed to setup your CAD/Toolpaths as you would normally, generate the Toolpaths, and then Post Process:
  
-=== 3.1 Post: Use Cloud Posts+=== 1.3.1 Post: Use Cloud Posts
  
 Click Setup > Use Cloud Posts Click Setup > Use Cloud Posts
  
-{{:docs:software:use_cloud_posts.png|}}+{{:docs:software:use_cloud_posts.png}}
  
-=== 3.2 Select the Post Processor ===+=== 1.3.2 Select the Post Processor ===
  
 Select the Post Processor from the dropdown menu: Select the Post Processor from the dropdown menu:
  
-{{:docs:software:fusion-post-list.png?600|}}+{{:docs:software:fusion-post-list.png?600}}
  
-=== 3.3 Customise Post Parameters (optional) ===+=== 1.3.3 Customise Post Parameters (optional) ===
  
 There are several parameters you can adjust to your choosing to tweak the behaviour and features of the Post There are several parameters you can adjust to your choosing to tweak the behaviour and features of the Post
  
-{{:docs:software:fusion-post-properties.png?600|}}+{{:docs:software:fusion-post-properties.png?600}} 
 + 
 +For example, setting the Router type - will include the recommended Speed Dial value in the G-code comments 
 + 
 +{{:docs:software:speed_dial.png}}
  
-For example, setting the Router type - will include the recommended Speed Dial value in the G-code comments +===== 2. Generating Plasma Gcode =====
  
-{{:docs:software:speed_dial.png|}}+Checkout the Plasma Readme at https://github.com/OpenBuilds/OpenBuilds-Fusion360-Postprocessor/blob/master/README-plasma.md
  
 +===== 3. Generating and Simulating 4-Axes Gcode =====
  
 +{{youtube>zaUeO4gNpmM?large|Generating and Simulating 4-Axes Gcode}}
  
docs/software/fusion360.1601927170.txt.gz · Last modified: 2024/08/05 15:15 (external edit)