OpenBuilds Documentation

Part Store Documentation Software Community Support
docs:interface:retrofit-x32

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
docs:interface:retrofit-x32 [2025/04/07 13:37]
admin 		docs:interface:retrofit-x32 [2025/04/07 13:39] (current)
admin
Line 3: Line 3:
 Older OpenBuilds Interface versions (V1.4 to V1.6) may not be 100% compatible with the new OpenBuilds BlackBox X32. If you notice a reboot-loop or you are advised by our support team to perform the retrofit - this page deals with the practical installation of the V-EXT JUMPER. Older OpenBuilds Interface versions (V1.4 to V1.6) may not be 100% compatible with the new OpenBuilds BlackBox X32. If you notice a reboot-loop or you are advised by our support team to perform the retrofit - this page deals with the practical installation of the V-EXT JUMPER.
  
-The instructions below, once applied, should make these older versions work with the new BlackBox X32+The instructions below, once applied, may make these older versions work with the new BlackBox X32 (though not guaranteed, it can help some older Interfaces remain usable, otherwise one may need to upgrade to a newer Interface to ensure compatibility) 
  
 === 1. Disassemble the Interface === === 1. Disassemble the Interface ===
docs/interface/retrofit-x32.1744033070.txt.gz ยท Last modified: 2025/04/07 13:37 by admin

Page Tools

All works Copyright © by OpenBuilds®, LLC
All rights reserved. This Documentation or any portion thereof including but not limited to (menu structures, images, layout, videos, graphical artwork, logos, names, trademarks, etc.) may not be reproduced or used in any manner whatsoever without the express written permission of OpenBuilds, LLC