Differences

This shows you the differences between two versions of the page.

--- docs:interface:firmware-update-flashdrive [2022/11/23 14:02]
admin
+++ docs:interface:firmware-update-flashdrive [2024/08/05 15:15] (current)
@@ Line 1: / Line 1: @@
-==== Firmware Update Method 2: Update via the USB Flash drive ====
+==== Firmware Update Method 3: Update via the USB Flash drive ====
-=== 3.2.2.1 Download the updated firmware binary file, and copy it to your USB flashdrive ===
+=== 3.1.3.1 Download the updated firmware binary file, and copy it to your USB flashdrive ===
 Use an internet connected computer to download the latest **firmware.bin**
@@ Line 13: / Line 13: @@
-=== 3.2.2.2 Insert the USB drive ===
+=== 3.1.3.2 Insert the USB drive ===
 Insert the USB flashdrive into the USB port on the right-hand side of the Interface, and Press the "Load File from USB Flashdrive" button on the Interface.
@@ Line 19: / Line 19: @@
 {{:docs:interface:upd-file-loadfilebtn.png?200|}}
-=== 3.2.2.3 Select the file to begin the Update ===
+=== 3.1.3.3 Select the file to begin the Update ===
 Select the firmware binary file you copied earlier, from the file menu
@@ Line 25: / Line 25: @@
 {{:docs:interface:upd-file-menu.png?200|}}
-=== 3.2.2.4 Please wait for the Update to be performed ===
+=== 3.1.3.4 Please wait for the Update to be performed ===
 During the update process, the percentage indicator will be continually updated to reflect the progress of the operation
@@ Line 31: / Line 31: @@
 {{:docs:interface:upd-file-progress.png?200|}}
-=== 3.2.2.5 Update Complete ===
+=== 3.1.3.5 Update Complete ===
 Upon completion of the update, the Interface will reboot itself to boot up with the new firmware
@@ Line 39: / Line 39: @@
 ----
- [[{}docs:interface:prepare-usb-drive|NEXT: Prepare your USB Flashdrive]]
+ [[{}docs:interface:wifi-setup-nextgen|NEXT: Prepare your USB Flashdrive and Set up WIFI]]

OpenBuilds Documentation

Differences

Page Tools