Differences

This shows you the differences between two versions of the page.

--- docs:interface:connect-blackbox-x32 [2024/06/17 18:44]
admin
+++ docs:interface:connect-blackbox-x32 [2024/08/05 15:15] (current)
@@ Line 11: / Line 11: @@
 ----
-Connect the Interface port on your BlackBox, to the BlackBox port on your Interface:
 | {{:docs:exclamation.png?60|}} | ** IMPORTANT NOTE No 1:  Make sure to disconnect the USB cable from the BlackBox**:  See [[https://docs.openbuilds.com/doku.php?id=docs:blackbox-x32:aux-serial|BlackBox Documentation: Section 5.1 Connecting BlackBox X32 to external Serial devices]] - this forces BlackBox to switch to the AUX port.   When the USB cable is connected to the BlackBox, it forces BlackBox into USB mode (I.e. no communications with the AUX port, and thus no communications with Interface) |
 | {{:docs:exclamation.png?30|}} | ** IMPORTANT NOTE No 2: ** Make sure to [[docs:interface:firmware-update-control|update your Interface to V1.57 Firmware or later for X32 Support]]  |
 | {{:docs:exclamation.png?30|}} | ** IMPORTANT NOTE No 3: ** See [[docs:interface:retrofit-x32|Retrofit older Interfaces for X32]] if your have an Interface V1.4, V1.5 or V1.6  |
+Connect the Interface port on your BlackBox, to the BlackBox port on your Interface:
 {{:docs:interface:pasted:20240617-181557.png?600}}

OpenBuilds Documentation