docs:blackbox-x32:connect-rc-servo
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
docs:blackbox-x32:connect-rc-servo [2025/04/01 18:27] admin |
docs:blackbox-x32:connect-rc-servo [2025/04/01 18:30] (current) admin |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ===== 3.3.6 BlackBox X32 RC Servo ===== | ===== 3.3.6 BlackBox X32 RC Servo ===== | ||
| - | ==== Important note on current (amperage): ==== | + | You can connect a RC Microservo directly to BlackBox: |
| - | |{{:docs: | + | === Important note on current (amperage): === |
| - | If you want to use a more heavy duty servo that may pull more than 250mA it would be recommended to use an external power source for the servo, otherwise you might damage the BlackBox | | + | |
| + | Please note the BlackBox can only supply around **250mA** for powering micro servos etc.\\ | ||
| + | If you want to use a more heavy duty servo that may pull more than 250mA it would be recommended to use an external power source for the servo, otherwise you might damage the BlackBox | ||
docs/blackbox-x32/connect-rc-servo.1743532051.txt.gz · Last modified: 2025/04/01 18:27 by admin