OpenBuilds Documentation

Part Store Documentation Software Community Support
docs:blackbox-x32:connect-psu

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
docs:blackbox-x32:connect-psu [2022/08/19 17:41]
127.0.0.1 external edit 		docs:blackbox-x32:connect-psu [2025/04/01 18:26] (current)
admin
Line 1: Line 1:
 ===== 3.1 Connecting BlackBox X32 to Power Supply Bundle (OpenBuilds PowerCase on a Meanwell LRS350 24v) ===== ===== 3.1 Connecting BlackBox X32 to Power Supply Bundle (OpenBuilds PowerCase on a Meanwell LRS350 24v) =====
  
-| {{:docs:exclamation.png?260|}} | **IMPORTANT WARNING**:  Please note, we recommend Meanwell Power supplies to ensure the safety and reliability of your BlackBox. Good quality power supplies ensure good, clean power to the controller. Avoid power supplies marketed as "LED power supplies" as they tend to lack filtering/protection circuitry, that can result in fatal power surges that can destroy your BlackBox. Use of other power supplies may affect your warranty.  |+{{fa>shopping-cart}} Order your [[https://openbuildspartstore.com/blackbox-motion-control-system/|OpenBuilds BlackBox X32 Motion Control System]]
  
----- +{{fa>shopping-cart}} Order your [[https://openbuildspartstore.com/24v-meanwell-power-supply-bundle/|24V Meanwell Power Supply & PowerCase Bundle]]
- +
-{{fa>shopping-cart}}   Order your [[https://openbuildspartstore.com/blackbox-motion-control-system/|OpenBuilds BlackBox X32 Motion Control System]]  +
- +
-{{fa>shopping-cart}}   Order your [[https://openbuildspartstore.com/24v-meanwell-power-supply-bundle/|24V Meanwell Power Supply & PowerCase Bundle]] +
  
 ---- ----
Line 15: Line 11:
 Before connecting your power supply to mains power, it is critical that you check and set the 115v/230v Switch on the right-side of the PSU: Before connecting your power supply to mains power, it is critical that you check and set the 115v/230v Switch on the right-side of the PSU:
  
-{{:docs:powercase:meanwell-psu.png?400|}}+{{:docs:blackbox-x32:meanwell-110v-switch.png?400}}
  
 Look out for the bright yellow sticker on the top, to help you locate the switch: Look out for the bright yellow sticker on the top, to help you locate the switch:
  
-{{:docs:powercase:meanwell-sticker.png?200|}}+{{:docs:powercase:meanwell-sticker.png?200}}
  
 ---- ----
Line 25: Line 21:
 ==== 3.1.2 Connecting OpenBuilds PowerCase on a Meanwell LRS350 24v to the BlackBox X32 ==== ==== 3.1.2 Connecting OpenBuilds PowerCase on a Meanwell LRS350 24v to the BlackBox X32 ====
  
-{{:docs:blackbox-x32:meanwell-powersupply.png?600|}}+|{{:docs:exclamation.png?100}}|**IMPORTANT WARNING**: Please note, double check your Polarity - wiring a BlackBox with reversed polarity will destroy it. Also never work on wiring of any sorts while power is on. Double check all wiring before turning on the power supply in case any mistakes were made.  | 
 +|{{:docs:exclamation.png?100}}|**IMPORTANT WARNING**: Please note, we recommend Meanwell Power supplies to ensure the safety and reliability of your BlackBox. Good quality power supplies ensure good, clean power to the controller. Avoid power supplies marketed as "LED power supplies" as they tend to lack filtering/protection circuitry, that can result in fatal power surges that can destroy your BlackBox. Use of other power supplies may affect your warranty.  | 
 + 
 +---- 
 + 
 +{{:docs:blackbox-x32:meanwell-powersupply.png?800}} 
 + 
docs/blackbox-x32/connect-psu.1660930889.txt.gz · Last modified: 2024/08/05 15:15 (external edit)

Page Tools

All works Copyright © by OpenBuilds®, LLC
All rights reserved. This Documentation or any portion thereof including but not limited to (menu structures, images, layout, videos, graphical artwork, logos, names, trademarks, etc.) may not be reproduced or used in any manner whatsoever without the express written permission of OpenBuilds, LLC