Differences

This shows you the differences between two versions of the page.

--- docs:blackbox-x32:connect-coolant [2022/08/24 18:32]
admin
+++ docs:blackbox-x32:connect-coolant [2024/08/05 15:15] (current)
@@ Line 24: / Line 24: @@
 ----
+==== 3.7.3 Connect Dust Extraction via IoT Relay ====
-==== 3.7.3 Connect 24VDC Air Solenoid ====
+You can use our [[https://openbuildspartstore.com/iot-switching-relay-power-strip/|IoT Relay Power Strip]] to control a Vacuum for dust extraction. Also checkout our [[https://openbuildspartstore.com/dust-shoe/|Dust Shoe]]
+Note: Even if you already have an IoT for your spindle, we recommend a second one for the Vacuum, as they are high current draw appliances and can overload the IoT relay if used with a spindle, and having a separate control signal for the Vacuum is a big bonus too.
+{{:docs:blackbox-x32:iotvacuum.png?600|}}
+----
+==== 3.7.4 Connect 24VDC Air Solenoid ====
 You can switch 24v Solenoids using the Coolant output.   Typically you'd use this configuration in-line between an Air-compressor and a Nozzle pointed at the endmill. Compressed air blowing on the endmill will help evacuate chips from the cut, and keep the endmill cool

OpenBuilds Documentation