docs:blackbox:faq-identify-motor-coils
Media Manager
Namespaces
Choose namespace
Media Files
Files in docs:tables
- step_1_install_caster_plate.jpg
- 1567×890
- 2020/12/01 15:12
- 109.1 KB
- step_2_mark_shelf_height.jpg
- 1567×890
- 2020/11/27 16:42
- 148.4 KB
- step_3_add_screws_teenuts.jpg
- 1567×890
- 2020/11/27 16:42
- 99.9 KB
- step_4_slide_bracket_to_mark.jpg
- 1567×890
- 2020/11/27 16:42
- 50.3 KB
- step_5_make_another_bracket_and_slide_to_mark.jpg
- 1567×890
- 2020/11/27 16:42
- 58.8 KB
- step_6_slide_down_to_mark.jpg
- 1567×890
- 2020/11/27 16:42
- 62 KB
- step_7_add_brackes_to_the_rest_of_the_legs.jpg
- 1567×890
- 2020/11/27 16:42
- 149.5 KB
- step_8_create_first_brace_by_adding_brackets_to_both_sides_of_the_20x60_v-slot.jpg
- 1567×890
- 2020/11/27 16:42
- 142.6 KB
- step_9_create_second_brace_same_as_the_first_as_shown.jpg
- 1567×890
- 2020/11/27 16:42
- 214.1 KB
- step_10_find_center_mark_on_side_frames_and_attach_one_on_each_side_of_the_brace.jpg
- 1567×890
- 2020/11/27 16:42
- 187.7 KB
- step_11_add_in_12_teenuts.jpg
- 1567×890
- 2020/11/30 16:28
- 180.4 KB
- step_12_place_legs_in_position.jpg
- 1567×890
- 2020/11/30 16:28
- 134.9 KB
- step_13_raise_frame_and_attach_to_brackets.jpg
- 1567×890
- 2020/11/30 16:28
- 317.1 KB
- step_14_slide_6_teenuts_into_back_frame_piece.jpg
- 1567×890
- 2020/11/30 16:28
- 149.8 KB
- step_15_attach_back_frame_piece.jpg
- 1567×890
- 2020/11/30 16:28
- 297.3 KB
- step_16_slide_6_teenuts_into_front_fdram_peice.jpg
- 1567×890
- 2020/11/30 16:28
- 177.6 KB
- step_17_attach_front_frame_piece.jpg
- 1567×890
- 2020/11/30 16:28
- 303.4 KB
- step_18_loosly_attach_teenuts_to_corner_bracket_as_shown.jpg
- 1567×890
- 2020/11/30 16:28
- 221.1 KB
- step_19_attach_brackets_to_all_4_legs_even_with_the_top_as_shown.jpg
- 1567×890
- 2020/11/30 16:28
- 274.2 KB
- step_20_make_up_4_more_corner_brackets_as_shown.jpg
- 1567×890
- 2020/11/30 16:28
- 254.5 KB
- step_21_slide_them_into_place_even_with_the_first_set_of_brackets.jpg
- 1567×890
- 2020/11/30 16:28
- 232.1 KB
- step_22_attach_brace_to_side_piece_with_12_teenuts.jpg
- 1567×890
- 2020/11/30 16:28
- 188.1 KB
- step_23_slide_in_to_place_12_tee_nuts_as_shown.jpg
- 1567×890
- 2020/11/30 16:28
- 183 KB
- step_24_position_brace_assembly.jpg
- 1567×890
- 2020/11/30 16:28
- 298.5 KB
- step_25_attach_brace_assemebly.jpg
- 1567×890
- 2020/11/30 16:28
- 334 KB
- step_26_slide_teenuts_into_back_frame_piece.jpg
- 1567×890
- 2020/11/30 16:28
- 291.3 KB
- step_27_attach_back_frame_piece.jpg
- 1567×890
- 2020/11/30 16:28
- 321.2 KB
- step_28_slide_tee_nuts_into_front_frame_piece.jpg
- 1567×890
- 2020/11/30 16:28
- 285.1 KB
- step_29_attach_front_frame_piece.jpg
- 1567×890
- 2020/11/30 16:28
- 375.9 KB
- step_30_slide_24_tee_nuts_into_front_and_back_frame_peices_on_both_shelves_as_shown.jpg
- 1567×890
- 2020/11/30 16:28
- 252.1 KB
- step_31_slide_24_tee_nuts_into_side_frame_peices_on_both_shelves_as_shown.jpg
- 1567×890
- 2020/11/30 16:28
- 235.2 KB
- step_32_attach_8_corners_as_shown.jpg
- 1567×890
- 2020/11/30 16:28
- 241.8 KB
- step_33_attach_l_brackets_flush_with_top_using_drop_in_tee_nuts.jpg
- 1567×890
- 2020/11/30 16:28
- 319.7 KB
- step_34_attach_more_l_brackets_where_you_will_want_to_hold_down_the_table_top_as_shown.jpg
- 1567×890
- 2020/11/30 16:28
- 333.6 KB
- step_35_rotate_assembly_onto_its_side_and_attach_4_casters_wheels.jpg
- 1567×890
- 2020/11/30 16:28
- 235.1 KB
- step_36_screw_table_top_down_to_frame_though_l_brackets_using_cutting_screws.jpg
- 1567×890
- 2020/11/30 16:28
- 299.6 KB
- step_37_add_optinal_bottom_shelf_board_notching_the_corners_60mm_as_shown.jpg
- 1567×890
- 2020/11/30 16:28
- 340.6 KB
- step_38_your_table_system_is_now_complete.jpg
- 1567×890
- 2020/11/30 16:28
- 298 KB
- tables-icon.png
- 28×24
- 2020/12/01 16:05
- 11.3 KB
- tables_big_1.216.png
- 1080×608
- 2020/11/30 18:21
- 282.5 KB
![[root]](/doku.php?id=docs:blackbox:faq-identify-motor-coils&ns=&tab_files=files&do=media&tab_details=view&image=docs%3Atables%3Astep_5_make_another_bracket_and_slide_to_mark.jpg){kind=link}
File
- Date:
- 2020/11/27 16:42
- Filename:
- step_5_make_another_bracket_and_slide_to_mark.jpg
- Format:
- JPEG
- Size:
- 59KB
- Width:
- 1567
- Height:
- 890
- References for:
- assembly
docs/blackbox/faq-identify-motor-coils.txt · Last modified: 2022/12/16 18:44 by admin