-
-
- 1. Installing Scribe Pen Lifter
- 2. Firmware Configuration
- 3. Software Configuration
-
Sidebar
docs:scribe:drawbotv3
This is an old revision of the document!
Table of Contents
Configure DrawBotV3 to use the SCRIBE Pen Lifter
1. Machines with a Z-Axis (Not using Servo)
2. Machines without a Z-Axis (Using Servo)
docs/scribe/drawbotv3.1733255221.txt.gz · Last modified: 2024/12/03 19:47 by admin