OpenBuilds Documentation

This is an old revision of the document!

• OpenBuilds® Documentation
  • 1. OpenBuilds BLOX
    • 1.1 Product Tour
    • 1.2 Detailed Terminal Map
  • 2. Wiring BLOX
    • 2.1 Power Supply
    • 2.2 Addressable LEDs
    • 2.3 GPIO: I2C / SPI / Analog / Digital / I2S
    • 2.4 RC Servo
    • 2.5 Stepper Motors
    • 2.6 Limits Inputs
    • 2.7 Switched Outputs
  • 3. Onboard BLOX Peripherals
    • 3.1 Buttons
    • 3.2 SD Card
    • 3.3 Beeper
    • 3.4 WIFI
  • 4. BLOX Developer Toolbox
  • 5. BLOX Firmware Options Overview
  • 6. BLOX Firmware Guide
    • 6.1 Workspace
    • 6.2 Events and Logic
    • 6.3 Inputs and Sensors
    • 6.4 Outputs:
      • 6.4.1 Servos
      • 6.4.2 Linear Actuators
      • 6.4.3 Switched Outputs
      • 6.4.4 Logging
      • 6.4.5 LEDs
      • 6.4.6 Audio: Onboard
      • 6.4.7 Audio: I2S
      • 6.4.8 Displays
    • 6.5 Compiling and Flashing
  • 7. Arduino Firmware Guide
  • 8. grblHAL Firmware Guide
  • 9. espHome Firmware Guide
  • 10. Other Firmwares
  • 11. Frequently Asked Questions
    • 11.1 Troubleshoot Stepper Motors / Identify Coil Wiring