-
-
- 1.1 Product Tour
- 2. Wiring BLOX
- 2.1 Power Supply
- 2.2 Addressable LEDs
- 2.4 RC Servo
- 2.5 Stepper Motors
- 2.6 Limits Inputs
- 2.7 Switched Outputs
- 3. Onboard BLOX Peripherals
- 6. BLOX Firmware Guide
- 6.1 Workspace
- 6.2 Events and Logic
- 6.4 Outputs:
- 6.4.1 Servos
- 6.4.2 Linear Actuators
- 6.4.3 Switched Outputs
- 6.4.4 Logging
- 6.4.5 LEDs
- 6.4.6 Audio: Onboard Beeper
- 6.4.7 Audio: I2S
- 6.4.8 Displays
- 6.6 WIFI
- 6.6.1 WIFI: Setup
- 6.6.2 WIFI: Timesync
- 10. Other Firmwares
- 11. Frequently Asked Questions
-
Sidebar
docs:blox:sdcard
This is an old revision of the document!
Table of Contents
3.2 SD Card
Blox has an onboard SD Card socket. You can use this to store data
3.3.2 Configuration
3.3.2.1 grblHAL/CONTROL
- For use with grblHAL's WebUI Plugin: https://github.com/grblHAL/Plugin_WebUI
3.3.2.2 LogiBLOX
- Reset Button reboots the device
- Mode Button is available as a Digital Sensor
- Holding MODE while pressing Reset enters Bootloader Mode
In LogiBLOX, the SD Card can be used:
To log sensor values to a CSV file
To store Audio files to play using an I2S DAC
Formatting an SD Card on demand (For example whenever the Mode button is pressed in this example)
docs/blox/sdcard.1723142016.txt.gz · Last modified: 2024/08/08 18:33 by admin