OpenBuilds BLOX can be used for simple 2-axes CNC machines (Pick and place, laser, pen plotter etc). You can use OpenBuilds CONTROL to flash grblHAL firmware onto the BLOX

https://software.openbuilds.com

Runs on Windows, Mac and Linux

After installation, start OpenBuilds CONTROL.

In CONTROL go to Wizards and Tools > Firmware Flashing Tool

\

Inside the Firmware Flashing Tool, click on the BLOX tab

Follow the onscreen instructions to place the BLOX into Bootloader Mode

Select the correct Port, Machine Style relevant to the machine you are building (Standard and CoreXY kinematic supported) and click FLASH to flash the firmware

The Log/Serial Terminal will display the progress as the tool writes the firmware to the BLOX.

Once it completes press the RESET button on the BLOX to let it boot up with grblHAL firmware

Once booted up, the Port ID will change and it will identify itself as a grblHAL based controller in the list. You can now CONNECT to it.

You are now connected

BLOX has software controller stepper driver current. Set the current in $140/141 = X and Y axis Stepper Driver Current respectively