-
-
- 1.1 Product Tour
- 2. Wiring BLOX
- 2.1 Power Supply
- 2.2 Addressable LEDs
- 2.4 RC Servo
- 2.5 Stepper Motors
- 2.6 Limits Inputs
- 2.7 Switched Outputs
- 3. Onboard BLOX Peripherals
- 6. BLOX Firmware Guide
- 6.1 Workspace
- 6.2 Events and Logic
- 6.4 Outputs:
- 6.4.1 Servos
- 6.4.2 Linear Actuators
- 6.4.3 Switched Outputs
- 6.4.4 Logging
- 6.4.5 LEDs
- 6.4.6 Audio: Onboard Beeper
- 6.4.7 Audio: I2S
- 6.4.8 Displays
- 6.6 WIFI
- 6.6.1 WIFI: Setup
- 6.6.2 WIFI: Timesync
- 10. Other Firmwares
- 11. Frequently Asked Questions
-
Sidebar
docs:blox:firmware-grblhal
This is an old revision of the document!
Table of Contents
4.3 Using BLOX with grblHAL and OpenBuilds CONTROL
OpenBuilds BLOX can be used for simple 2-axes CNC machines (Pick and place, laser, pen plotter etc). You can use OpenBuilds CONTROL to flash grblHAL firmware onto the BLOX
4.2.1 CONTROL
docs/blox/firmware-grblhal.1723726074.txt.gz · Last modified: 2024/08/15 12:47 by admin