-
-
- 1.1 Product Tour
- 2. Wiring BLOX
- 2.1 Power Supply
- 2.2 Addressable LEDs
- 2.4 RC Servo
- 2.5 Stepper Motors
- 2.6 Limits Inputs
- 2.7 Switched Outputs
- 3. Onboard BLOX Peripherals
- 6. BLOX Firmware Guide
- 6.1 Workspace
- 6.2 Events and Logic
- 6.4 Outputs:
- 6.4.1 Servos
- 6.4.2 Linear Actuators
- 6.4.3 Switched Outputs
- 6.4.4 Logging
- 6.4.5 LEDs
- 6.4.6 Audio: Onboard Beeper
- 6.4.7 Audio: I2S
- 6.4.8 Displays
- 6.6 WIFI
- 6.6.1 WIFI: Setup
- 6.6.2 WIFI: Timesync
- 10. Other Firmwares
- 11. Frequently Asked Questions
-
Sidebar
docs:blox:examples-xystage
This is an old revision of the document!
Table of Contents
7.4 XY Stage Examples
BLOX can be used with 2-axes machines
7.4.1 Initialization for XY Stages
Before you can use a 2-axis system, you need to set it up so the controller knows how to control it correctly. Make use of the Initialization Blocks to configure them for use with the BLOX:
| Linear Actuators | Details | Initialization Blocks |
|---|---|---|
C-Beam XLarge X/Y Table  | Lead Screw Driven TR8*8-2P (4 starts) Leadscrew NEMA 23 Motor 400 Steps per millimeter Acceleration: +-150 mm/sec² | |
OpenBuilds ACRO System  | Belt Driven GT2-2M Timing Belts 14T Pulley NEMA 17 Motor 114.29 Steps per millimeter Acceleration: +-350 mm/sec² |
docs/blox/examples-xystage.1724092806.txt.gz · Last modified: 2024/08/19 18:40 by admin