-
-
- 1.1 Product Tour
- 2. Wiring BLOX
- 2.1 Power Supply
- 2.2 Addressable LEDs
- 2.4 RC Servo
- 2.5 Stepper Motors
- 2.6 Limits Inputs
- 2.7 Switched Outputs
- 3. Onboard BLOX Peripherals
- 6. BLOX Firmware Guide
- 6.1 Workspace
- 6.2 Events and Logic
- 6.4 Outputs:
- 6.4.1 Servos
- 6.4.2 Linear Actuators
- 6.4.3 Switched Outputs
- 6.4.4 Logging
- 6.4.5 LEDs
- 6.4.6 Audio: Onboard Beeper
- 6.4.7 Audio: I2S
- 6.4.8 Displays
- 6.6 WIFI
- 6.6.1 WIFI: Setup
- 6.6.2 WIFI: Timesync
- 10. Other Firmwares
- 11. Frequently Asked Questions
-
Sidebar
docs:blox:examples-leds
This is an old revision of the document!
Table of Contents
6.4.5 Using onboard and addressable LEDs with BLOX
BLOX can be used to control addressable LEDs. It has two already onboard ready to use
6.4.5.1 Onboard LEDs
You can set the colors of the onboard LEDs using the “Set BLOX LED Colors” block
docs/blox/examples-leds.1724867567.txt.gz · Last modified: 2024/08/28 17:52 by admin