-
-
- 1.1 Product Tour
- 2. Wiring BLOX
- 2.1 Power Supply
- 2.2 Addressable LEDs
- 2.4 RC Servo
- 2.5 Stepper Motors
- 2.6 Limits Inputs
- 2.7 Switched Outputs
- 3. Onboard BLOX Peripherals
- 6. BLOX Firmware Guide
- 6.1 Workspace
- 6.2 Events and Logic
- 6.4 Outputs:
- 6.4.1 Servos
- 6.4.2 Linear Actuators
- 6.4.3 Switched Outputs
- 6.4.4 Logging
- 6.4.5 LEDs
- 6.4.6 Audio: Onboard Beeper
- 6.4.7 Audio: I2S
- 6.4.8 Displays
- 6.6 WIFI
- 6.6.1 WIFI: Setup
- 6.6.2 WIFI: Timesync
- 10. Other Firmwares
- 11. Frequently Asked Questions
-
Sidebar
docs:blox:examples-display
This is an old revision of the document!
Table of Contents
6.4.8 Displays
BLOX can be used to to display text and graphics on a couple different I2C and SPI based monochrome displays
6.4.8.1 Wiring the display
6.4.8.2 Initialize the display
6.4.8.3 Clear the display
6.4.8.4 Draw graphics elements on the display
6.4.8.5 Draw Images on the display
6.4.8.6 Draw Bitmaps on the display
6.4.8.7 Monitor Sensor values on the display
docs/blox/examples-display.1724692993.txt.gz · Last modified: 2024/08/26 17:23 by admin