-
-
- 1.1 Product Tour
- 2. Wiring BLOX
- 2.1 Power Supply
- 2.2 Addressable LEDs
- 2.4 RC Servo
- 2.5 Stepper Motors
- 2.6 Limits Inputs
- 2.7 Switched Outputs
- 3. Onboard BLOX Peripherals
- 6. BLOX Firmware Guide
- 6.1 Workspace
- 6.2 Events and Logic
- 6.4 Outputs:
- 6.4.1 Servos
- 6.4.2 Linear Actuators
- 6.4.3 Switched Outputs
- 6.4.4 Logging
- 6.4.5 LEDs
- 6.4.6 Audio: Onboard Beeper
- 6.4.7 Audio: I2S
- 6.4.8 Displays
- 6.6 WIFI
- 6.6.1 WIFI: Setup
- 6.6.2 WIFI: Timesync
- 10. Other Firmwares
- 11. Frequently Asked Questions
-
Sidebar
docs:blox:connect-ws2812
Table of Contents
2.2 Connecting BLOX to WS2812 Addressable RGB LEDs
OpenBuilds BLOX supports external LED strings, matrixes and rings containing WS2812 based addressable LEDs. It comes with 2x LEDs onboard ready to use as well!
- Max Current: 2A
- Voltage: 5v (Same as Input voltage)
- LED Type: WS2812B
- LED Address: 2+ (0,1=Onboard)
2.2.1 Wiring
| BLOX Terminal | Device |
| GND | GND |
| 5V | 5V IN |
| LDO | DIN (LED Data In) |
 |  |  |
docs/blox/connect-ws2812.txt · Last modified: 2024/08/15 12:51 by admin