-
-
- 1.1 Product Tour
- 2. Wiring BLOX
- 2.1 Power Supply
- 2.2 Addressable LEDs
- 2.4 RC Servo
- 2.5 Stepper Motors
- 2.6 Limits Inputs
- 2.7 Switched Outputs
- 3. Onboard BLOX Peripherals
- 6. BLOX Firmware Guide
- 6.1 Workspace
- 6.2 Events and Logic
- 6.4 Outputs:
- 6.4.1 Servos
- 6.4.2 Linear Actuators
- 6.4.3 Switched Outputs
- 6.4.4 Logging
- 6.4.5 LEDs
- 6.4.6 Audio: Onboard Beeper
- 6.4.7 Audio: I2S
- 6.4.8 Displays
- 6.6 WIFI
- 6.6.1 WIFI: Setup
- 6.6.2 WIFI: Timesync
- 10. Other Firmwares
- 11. Frequently Asked Questions
-
Sidebar
docs:blox:connect-switched-outputs
This is an old revision of the document!
3.9 Switched Output
The Switched Outputs are are used to switch the incoming power supply voltage out to a device. It can be switched on/off or controlled with PWM (Pulse Width Modulation)
Make sure any devices powered off the switch output have the correct voltage rating to match your DC power supply, and does not use more than 2A of current.
- Max Current: 2A
- Voltage: 12-30v (Same as Input voltage)
- Suitable for inductive loads
| Switched Output Example: Motors / LEDs | Switched Output Example: Relays | Switched Output Example: IoT Relay / Solenoid |
 |  |  |
docs/blox/connect-switched-outputs.1722878207.txt.gz · Last modified: 2024/08/05 17:16 by admin