-
-
- 1.1 Product Tour
- 2. Wiring BLOX
- 2.1 Power Supply
- 2.2 Addressable LEDs
- 2.4 RC Servo
- 2.5 Stepper Motors
- 2.6 Limits Inputs
- 2.7 Switched Outputs
- 3. Onboard BLOX Peripherals
- 6. BLOX Firmware Guide
- 6.1 Workspace
- 6.2 Events and Logic
- 6.4 Outputs:
- 6.4.1 Servos
- 6.4.2 Linear Actuators
- 6.4.3 Switched Outputs
- 6.4.4 Logging
- 6.4.5 LEDs
- 6.4.6 Audio: Onboard Beeper
- 6.4.7 Audio: I2S
- 6.4.8 Displays
- 6.6 WIFI
- 6.6.1 WIFI: Setup
- 6.6.2 WIFI: Timesync
- 10. Other Firmwares
- 11. Frequently Asked Questions
-
Sidebar
docs:blox:connect-gpio
This is an old revision of the document!
Table of Contents
2.3 Connecting BLOX to sensors, modules and logic devices
OpenBuilds BLOX Provides direct GPIO access to spare microcontroller pins.
- Max Current: 40mA Source, 28mA Sink
- Voltage: 3.3v (Strictly: Do not exceed)
2.3.1 Wiring
BLOX provides I2C, SPI and GPIO terminals. The back panel contains additional technical information
docs/blox/connect-gpio.1723641693.txt.gz · Last modified: 2024/08/14 13:21 by admin