OpenBuilds Documentation

Sidebar

OpenBuilds® Documentation
- 1. OpenBuilds BLOX
  - 1.1 Product Tour
  - 1.2 Detailed Terminal Map
- 2. Wiring BLOX
  - 2.1 Power Supply
  - 2.2 Addressable LEDs
  - 2.3 GPIO: I2C / SPI / Analog / Digital / I2S
  - 2.4 RC Servo
  - 2.5 Stepper Motors
  - 2.6 Limits Inputs
  - 2.7 Switched Outputs
- 3. Onboard BLOX Peripherals
  - 3.1 Buttons
  - 3.2 SD Card
  - 3.3 Beeper
  - 3.4 WIFI
- 4. BLOX Developer Toolbox
- 5. BLOX Firmware Options Overview
- 6. BLOX Firmware Guide
  - 6.1 Workspace
  - 6.2 Events and Logic
  - 6.3 Inputs and Sensors
  - 6.4 Outputs:
    - 6.4.1 Servos
    - 6.4.2 Linear Actuators
    - 6.4.3 Switched Outputs
    - 6.4.4 Logging
    - 6.4.5 LEDs
    - 6.4.6 Audio: Onboard Beeper
    - 6.4.7 Audio: I2S
    - 6.4.8 Displays
  - 6.6 WIFI
    - 6.6.1 WIFI: Setup
    - 6.6.2 WIFI: Timesync
    - 6.6.2 WIFI: Broadcast / Receive
  - 6.7 Compiling and Flashing
- 7. Arduino Firmware Guide
- 8. grblHAL Firmware Guide
- 9. espHome Firmware Guide
- 10. Other Firmwares
- 11. Frequently Asked Questions
  - 11.1 Troubleshoot Stepper Motors / Identify Coil Wiring

docs:blox:beeper

3.3 Beeper

Blox has an onboard Beeper. This can be used for Audible notifications

docs/blox/beeper.txt · Last modified: 2024/08/15 12:53 by admin

Page Tools

Backlinks
Back to top

All works Copyright © 2017 by OpenBuilds® ,LLC
All rights reserved. This Documentation or any portion thereof including but not limited to (menu structures, images, layout, videos, graphical artwork, logos, names, trademarks, etc.) may not be reproduced or used in any manner whatsoever without the express written permission of OpenBuilds, LLC

Log In
Media Manager
Sitemap