• OpenBuilds® Documentation
    • 1. OpenBuilds BLOX
      • 1.1 Product Tour
      • 1.2 Detailed Terminal Map
    • 2. Wiring BLOX
      • 2.1 Power Supply
      • 2.2 Addressable LEDs
      • 2.3 GPIO: I2C / SPI / Analog / Digital / I2S
      • 2.4 RC Servo
      • 2.5 Stepper Motors
      • 2.6 Limits Inputs
      • 2.7 Switched Outputs
    • 3. Onboard BLOX Peripherals
      • 3.1 Buttons
      • 3.2 SD Card
      • 3.3 Beeper
      • 3.4 WIFI
    • 4. BLOX Developer Toolbox
    • 5. BLOX Firmware Options Overview
    • 6. BLOX Firmware Guide
      • 6.1 Workspace
      • 6.2 Events and Logic
      • 6.3 Inputs and Sensors
      • 6.4 Outputs:
        • 6.4.1 Servos
        • 6.4.2 Linear Actuators
        • 6.4.3 Switched Outputs
        • 6.4.4 Logging
        • 6.4.5 LEDs
        • 6.4.6 Audio: Onboard Beeper
        • 6.4.7 Audio: I2S
        • 6.4.8 Displays
      • 6.6 WIFI
        • 6.6.1 WIFI: Setup
        • 6.6.2 WIFI: Timesync
        • 6.6.2 WIFI: Broadcast / Receive
      • 6.7 Compiling and Flashing
    • 7. Arduino Firmware Guide
    • 8. grblHAL Firmware Guide
    • 9. espHome Firmware Guide
    • 10. Other Firmwares
    • 11. Frequently Asked Questions
      • 11.1 Troubleshoot Stepper Motors / Identify Coil Wiring