Differences

This shows you the differences between two versions of the page.

--- docs:software:rhinocam_visualcam [2024/09/09 18:34]
admin created
+++ docs:software:rhinocam_visualcam [2024/09/09 18:39] (current)
admin
@@ Line 4: / Line 4: @@
 Included are the two posts (Inch and Millimeter) that RhinoCAM 2024 and VisualCAD/CAM 2024 customers can use.
+[[https://github.com/OpenBuilds/OpenBuilds-RhinoCAM-Postprocessor/archive/refs/heads/master.zip|{{:docs:blackbox-4x:download-button.png?200|}}]]
 ==== 2. Install the Post Processors ====
@@ Line 9: / Line 12: @@
 Please follow these steps to install your customized post processor for use with your product version
-Use the Windows File explorer to go to your Program Data folder.  This is typically called ProgramData and you can find it on your system drive - usually the C:\ drive. This folder is hidden, so you’ll only see it if you show hidden files set in your operating system.
+  * Unzip the downloaded Post Processors archive.
-Now go to ProgramData/MecSoft Corporation/2024 product/POSTS/MILL/SPM/ folder
+  * Use the Windows File explorer to go to your Program Data folder.  This is typically called ProgramData and you can find it on your system drive - usually the C:\ drive. This folder is hidden, so you’ll only see it if you show hidden files set in your operating system.
-Copy the customized post to this folder
+  * Now go to ProgramData/MecSoft Corporation/2024 product/POSTS/MILL/SPM/ folder
-Bring up your product and you should be able to use your customized post-processor in the list of available posts.
+  * Copy the unzipped files (SPM files) to this folder
+  * Bring up your product and you should be able to use your customized post-processor in the list of available posts.

OpenBuilds Documentation

Differences

Page Tools