OpenBuilds Documentation

Part Store Documentation Software Community Support
docs:software:openbuilds-cam

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
docs:software:openbuilds-cam [2024/08/05 15:15]
127.0.0.1 external edit 		docs:software:openbuilds-cam [2025/05/08 14:04] (current)
admin
Line 3: Line 3:
 ==== 1. Go to OpenBuilds CAM at https://cam.openbuilds.com ==== ==== 1. Go to OpenBuilds CAM at https://cam.openbuilds.com ====
  
-{{:docs:software:openbuilds-cam.png?300|}}+{{:docs:software:pasted:20250508-140028.png?300}}
  
 ==== 2. Click the Settings Button on the Settings Tab ==== ==== 2. Click the Settings Button on the Settings Tab ====
  
-{{:docs:software:openbuilds-cam-settings.png?200|}}+ 
 +{{:docs:software:pasted:20250508-140118.png?300}}
  
 ==== 3. Select the controller  ==== ==== 3. Select the controller  ====
  
-Select the relevant CNC controller, Machine and Tools from the Dropdown lists (or scroll down and customise the settings yourself)+Select the relevant Machine and Add-On Tools you have, then click on Save
  
-{{:docs:software:openbuilds-cam-blackbox.png?300|}}+{{:docs:software:pasted:20250508-140138.png?600}}
  
 +Optional: If you require further customization (normally not needed, so proceed with caution) click on //Show Advanced Settings//
docs/software/openbuilds-cam.1722870916.txt.gz · Last modified: 2024/08/05 15:15 by 127.0.0.1

Page Tools

All works Copyright © by OpenBuilds®, LLC
All rights reserved. This Documentation or any portion thereof including but not limited to (menu structures, images, layout, videos, graphical artwork, logos, names, trademarks, etc.) may not be reproduced or used in any manner whatsoever without the express written permission of OpenBuilds, LLC