OpenBuilds Documentation

Part Store Documentation Software Community Support
docs:software:file-errors

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
docs:software:file-errors [2025/03/19 12:12]
admin 		docs:software:file-errors [2025/03/19 12:14] (current)
admin
Line 7: Line 7:
 The following generic tips usually apply: The following generic tips usually apply:
  
-====== Closed Geometry Vectors ======+===== Closed Geometry Vectors =====
  
 CAM software needs to calculate offsets to do contour cuts and pockets - and most of the mathematics require the vectors you want to use to be "closed vectors" CAM software needs to calculate offsets to do contour cuts and pockets - and most of the mathematics require the vectors you want to use to be "closed vectors"
Line 21: Line 21:
   * The file may not have been designed for CNC use, either redraw or use a different drawing.   * The file may not have been designed for CNC use, either redraw or use a different drawing.
  
-====== Path Data / Polylines ======+===== Path Data / Polylines =====
  
-Most CAM applications prefer their data to be "paths" (Not just OpenBuilds CAM) +Most CAM applications prefer their data to be "paths" (Not just OpenBuilds CAM, many others also work better with files that contain path/polyline type, simpler to process and import) 
  
 ==== Paths (SVG) ==== ==== Paths (SVG) ====
Line 39: Line 39:
 {{:docs:software:pasted:20250319-121002.png}} {{:docs:software:pasted:20250319-121002.png}}
  
-====== DXF Repair with QCAD ======+==== DXF Repair with QCAD ====
  
 Checkout https://builds.openbuilds.com/threads/problems-with-importing-dxf-into-obcam.17132/#post-109203 for an example of using QCAD to repair a DXF where the entities are not all Polyline Checkout https://builds.openbuilds.com/threads/problems-with-importing-dxf-into-obcam.17132/#post-109203 for an example of using QCAD to repair a DXF where the entities are not all Polyline
  
-====== File Versioning ======+{{:docs:software:pasted:20250319-121320.png?200}} 
 + 
 +===== File Versioning =====
  
 Especially in the case of DXFs, there are multiple versions of the DXF file standard that was released over the years. If you have trouble importing a DXF into your CAM application, a good first port of call, would be to "save-as" the file and select an older version of the DXF standard, for example, DXF R14 Polylines Especially in the case of DXFs, there are multiple versions of the DXF file standard that was released over the years. If you have trouble importing a DXF into your CAM application, a good first port of call, would be to "save-as" the file and select an older version of the DXF standard, for example, DXF R14 Polylines
docs/software/file-errors.1742386327.txt.gz · Last modified: 2025/03/19 12:12 by admin

Page Tools

All works Copyright © by OpenBuilds®, LLC
All rights reserved. This Documentation or any portion thereof including but not limited to (menu structures, images, layout, videos, graphical artwork, logos, names, trademarks, etc.) may not be reproduced or used in any manner whatsoever without the express written permission of OpenBuilds, LLC