Differences

This shows you the differences between two versions of the page.

--- docs:scribe:sidebar [2024/12/03 18:19]
admin created
+++ docs:scribe:sidebar [2025/02/12 12:59] (current)
admin
@@ Line 1: / Line 1: @@
 ~~NOCACHE~~
-  * {{fa>home|Home}} [[::start|OpenBuilds® Documentation]]
-    * {{:docs:xyzprobe:xyzprobe-icon.png?24|}} [[docs:xyzprobe:start|OpenBuilds XYZ Probe Plus]]
+  * {{fa>home|Home}}  [[:start|OpenBuilds® Documentation]]
-      * 1. {{fa>wrench|Assemble}}Assembling XYZ Probe Plus
+      * {{:docs:scribe:scribe.png?24}} [[:docs:scribe:start|OpenBuilds® Scribe Pen Lifter]]
-        * [[docs:xyzprobe:assemblyinstructions|1.1 Assembly Instructions]]
+        * 1. {{fa>wrench|Assemble}} Installing Scribe Pen Lifter
-        * [[docs:xyzprobe:assemblyvideo|1.2 Assembly Video]]
+          * [[:docs:scribe:mount-acro|1.1 Install on an ACRO]]
-      * 2. {{fa>cogs|Configure}} Wiring XYZ Probe Plus
+          * [[:docs:scribe:mount-router|1.2 Install on a Router Mount]]
-        * [[docs:xyzprobe:wiringtoblackbox|2.1 Wiring to a BlackBox]]
+        * 2. {{fa>cloud-download|Software}} Firmware Configuration
-        * [[docs:xyzprobe:wiringgeneric|2.2 Wiring to a controller (generic)]]
+          * [[:docs:scribe:grbl|2.1 Configure Grbl Settings using OpenBuilds CONTROL]]
-      * 3. {{fa>download|Drivers and Software}} Software
+        * 3. {{fa>cloud-download|Software}} Software Configuration
-        * [[docs:xyzprobe:software-control|3.1 Use with OpenBuilds CONTROL]]
+          * [[:docs:scribe:cam|3.1 Configure OpenBuilds CAM]]
-        * [[docs:xyzprobe:software-gcode|3.2 Use with GCODE]]
+          * [[:docs:scribe:drawbotv3|3.2 Configure DrawingBot V3 CAM]]
+        * 4. {{fa>pencil|First Project}} [[:docs:scribe:hello-world|First Project]]

OpenBuilds Documentation

Differences

Page Tools