Differences

This shows you the differences between two versions of the page.

--- docs:scribe:drawbotv3 [2024/12/06 12:04]
admin [1. Machines with a Z-Axis (Not using Servo)]
+++ docs:scribe:drawbotv3 [2024/12/06 12:06] (current)
admin
@@ Line 1: / Line 1: @@
+===== Download and Install DrawingBotV3 to use the SCRIBE Pen Lifter =====
+Checkout [[https://github.com/SonarSonic/DrawingBotV3|https://github.com/SonarSonic/DrawingBotV3]]
 ===== Configure DrawingBotV3 to use the SCRIBE Pen Lifter =====
-Inside DrawingBotV3, go to FILE > Preferences\\
+Inside DrawingBotV3, go to FILE > Preferences
-\\
 Inside the Preferences video, go to Export Settings > GCode
-Configure the Start, End, Pen Down and Pen Up command as shown \\
+Configure the Start, End, Pen Down and Pen Up command as shown - depending on whether you want to use the Z-axis or the Servo to lift the Pen
 ==== 1. Machines with a Z-Axis (Not using Servo) ====

OpenBuilds Documentation