Differences

This shows you the differences between two versions of the page.

--- docs:interface:fat32format [2024/10/17 13:53]
admin
+++ docs:interface:fat32format [2024/10/17 13:56] (current)
admin
@@ Line 3: / Line 3: @@
 For optimal performance, you need a FAT32 formatted flashdrive. If you would like to reformat a flashdrive as FAT32, you can use the USB Disk Storage Format Tool:
-Download the USB Storage Format Tool, and install it on your computer: Click here:
+Download the FAT32 GUIFormat Tool, and run it on your computer: Click here: {{ :docs:interface:guiformat.zip |}}
-Run the USB Storage Format Tool as an Administrator: Click the Start menu, search for "USB Disk Storage Format", right click on the "USB Disk Storage Format Tool" and select "Run as Administrator"
+Format your USB drive as FAT32
-{{:docs:interface:run_as_admin.png}}
-Allow the application to run: Click Allow
+{{:docs:interface:pasted:20241017-135627.png}}
-{{:docs:interface:allow.png?300}}
-  * Select the USB drive you want to format under Device - take care to format the correct one, as all data will be erased from the drive
-  * Select FAT32 as the Filesystem
-  * Tick Quick Format, and Verbose. Untick all the other checkboxes
-  * Click Format Disk
-{{:docs:interface:options.png}}
+Once formatted, remember to [[:docs:interface:wifi-setup-nextgen|Prepare your flashdrive for use with Interface]]
-Once formatted, remember to [[:docs:interface:prepare-usb-drive|Prepare your flashdrive for use with Interface]]

OpenBuilds Documentation