Differences

This shows you the differences between two versions of the page.

--- docs:blox:examples-xystage [2024/08/19 17:39]
admin
+++ — (current)
@@ Line 1: / Line 1: @@
-====== 7.2 XY Stage Examples ======
-BLOX can be used with 2-axes machines
-===== 7.2.1 Initialization for XY Stages =====
-Before you can use a 2-axis system, you need to set it up so the controller knows how to control it correctly. Make use of the Initialization Blocks to configure them for use with the BLOX:
-^Linear Actuators^Details  ^Initialization Blocks|
-|  **[[https://openbuildspartstore.com/c-beam-xlarge-x-y-table-bundle/|C-Beam XLarge X/Y Table]]  ** \\ {{:docs:linear-actuators:actuator11.png?100}}  |Lead Screw Driven \\ TR8*8-2P (4 starts) Leadscrew \\ NEMA 23 Motor \\ 400 Steps per millimeter \\ Acceleration: +-150 mm/sec²|   |
-|  **[[https://openbuildspartstore.com/acro/|OpenBuilds ACRO System]]  ** \\ {{:docs:blox:pasted:20240819-124444.png?100}}  |Belt Driven \\ GT2-2M Timing Belts \\ 14T Pulley \\ NEMA 17 Motor \\ 114.29 Steps per millimeter \\ Acceleration: +-350 mm/sec²|   |
-----

OpenBuilds Documentation