Differences

This shows you the differences between two versions of the page.

--- docs:blox:connect-switched-outputs [2024/08/08 17:50]
admin
+++ docs:blox:connect-switched-outputs [2024/08/15 12:53] (current)
admin
@@ Line 1: / Line 1: @@
-===== 2.7 Switched Output =====
+====== 2.7 Switched Output ======
 The Switched Outputs are are used to switch the incoming power supply voltage out to a device.  It can be switched on/off or controlled with PWM (Pulse Width Modulation)
@@ Line 9: / Line 9: @@
   * Suitable for inductive loads
-==== 2.7.1 Wiring ====
+----
+===== 2.7.1 Wiring =====
 | **BLOX Terminal** | **Device** |
@@ Line 18: / Line 20: @@
 | {{:docs:blox:pasted:20240805-150114.png?300}} | {{:docs:blox:pasted:20240805-150135.png?300}} | {{:docs:blox:pasted:20240805-150210.png?300}} |
-==== 2.7.2 Configuration ====
+----
-=== 2.7.2.1 grblHAL/CONTROL ===
-No additional grblHAL settings required
-Use the **M7/M8/M9** commands to control the outputs (Mist/Coolant)
-=== 2.7.2.2 LogiBLOX ===
-Use for ON/OFF control of devices attached to the Switched Outputs
-{{:docs:blox:pasted:20240808-174933.png}}
-Set a PWM (Pulse Width Modulation) value (Useful for dimming LED strips, or controlling the speed of a motor attached to the Switched Outputs)
-{{:docs:blox:pasted:20240808-174843.png}}

OpenBuilds Documentation