Differences

This shows you the differences between two versions of the page.

--- docs:blox:connect-limit-switches [2024/08/15 12:52]
admin
+++ docs:blox:connect-limit-switches [2024/08/15 12:52] (current)
admin
@@ Line 35: / Line 35: @@
 Set the jumper according to the required voltage for the sensor / limit switches attached:
-=== 5V Endstops (Default) ===
+==== 5V Endstops (Default) ====
 {{:docs:blox:pasted:20240805-125635.png?200}}
-=== 12-30V Endstops (Same as input supply voltage) ===
+==== 12-30V Endstops (Same as input supply voltage) ====
 {{:docs:blox:pasted:20240805-125356.png?200}}

OpenBuilds Documentation