Differences

This shows you the differences between two versions of the page.

--- docs:blox:buttons [2024/08/08 17:41]
admin
+++ docs:blox:buttons [2024/08/15 12:53] (current)
admin
@@ Line 1: / Line 1: @@
-===== 3.1 Onboard Buttons =====
+====== 3.1 Onboard Buttons ======
 Blox has two onboard buttons to control its operation
@@ Line 10: / Line 10: @@
 | **Mode** | Can be used to place the device into Bootloader mode, and also available inside the firmware as an accessible input button |
-==== 3.3.1 Configuration ====
+----
-=== 3.3.1.1 grblHAL/CONTROL ===
-  * Reset reboots the device
-  * Mode Button is not assigned
-  * Holding MODE while pressing Reset enters Bootloader Mode
-=== 3.3.1.2 LogiBLOX ===
-  * Reset Button reboots the device
-  * Mode Button is available as a Digital Sensor
-  * Holding MODE while pressing Reset enters Bootloader Mode
-In LogiBLOX, the SD Card can be used
-To log sensor values to a CSV file
-{{:docs:blox:pasted:20240808-173915.png}}
-To store Audio files to play using an I2S DAC
-{{:docs:blox:pasted:20240808-174006.png}}
-Formatting an SD Card on demand (For example whenever the Mode button is pressed in this example)
-{{:docs:blox:pasted:20240808-174056.png}}

OpenBuilds Documentation