Differences

This shows you the differences between two versions of the page.

--- docs:blackbox-x32:jumper-rgb [2024/10/04 19:12]
admin removed
+++ — (current)
@@ Line 1: / Line 1: @@
-===== 2.1.4 Change the Logo Backlight LED Color (Advanced) =====
-OpenBuilds BlackBox has an onboard RGB LED: If your machine has a theme / specific color preference, you can use the solder-jumpers to the right of the RGB LED to configure a custom backlight color for the logo on the top panel:
-Use an Exacto knife to cut the bridge between the pads of a solder jumper to remove that color from the mix, or close the solder jumpers with a drop of solder to add a color back to the mix.
-For example, if you want a RED backlight, simply slice the bridge for GREEN and BLUE. If you want Purple/Pink, Slice the GREEN jumper and close the RED and BLUE jumpers
-{{:docs:blackbox-x32:jumper-rgb.png?600|}}

OpenBuilds Documentation