docs:blackbox-x32:jumper-autoreset
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
docs:blackbox-x32:jumper-autoreset [2022/12/05 19:41] admin removed |
— (current) | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ===== 2.1.2 Disable AutoReset (Advanced) ===== | ||
| - | |||
| - | OpenBuilds BlackBox includes a jumper that can be removed to disable USB Autoreset (Arduino / DTR style reset circuit). | ||
| - | |||
| - | |||
| - | For normal use cases, the jumper can be in either position, but for Firmware Updates it should be in the CLOSED position. | ||
| - | |||
| - | If your BlackBox shipped with the jumper removed (some versions do), be sure to remove it again after firmware update to prevent damage. | ||
| - | If you do not have a spare jumper, you can borrow one of the others jumpers. | ||
| - | |||
| - | |||
| - | {{: | ||
docs/blackbox-x32/jumper-autoreset.1670269307.txt.gz ยท Last modified: 2024/08/05 15:15 (external edit)