Differences

This shows you the differences between two versions of the page.

--- docs:blackbox-x32:connect-micro-limit [2022/12/07 18:03]
admin
+++ docs:blackbox-x32:connect-micro-limit [2024/08/05 15:15] (current)
@@ Line 5: / Line 5: @@
 | {{:docs:exclamation.png?120|}} | **IMPORTANT WARNING**: Note: Incorrect wiring can short V+ to GND causing damage to your controller: Double check wiring before powering on. We recommend using 2-core wiring only for this type of switch to avoid accidentally shorting V+. Only connect SIG and GND pins on the BlackBox. |
-> Make sure to set [code]$5=7[/code] to use Normally Open switches with grblHAL on the BlackBox X32
+> Make sure to set $5=7 to use Normally Open switches with grblHAL on the BlackBox X32
 If you need a more EMI proof solution, consider upgrading to [[https://openbuildspartstore.com/xtension-limit-switch-kit/|OpenBuilds Xtension Limit Switches]]

OpenBuilds Documentation