OpenBuilds Documentation

Part Store Documentation Software Community Support
docs:blackbox-x32:connect-micro-limit

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
docs:blackbox-x32:connect-micro-limit [2022/08/24 18:02]
admin 		docs:blackbox-x32:connect-micro-limit [2024/08/05 15:15] (current)
Line 5: Line 5:
 | {{:docs:exclamation.png?120|}} | **IMPORTANT WARNING**: Note: Incorrect wiring can short V+ to GND causing damage to your controller: Double check wiring before powering on. We recommend using 2-core wiring only for this type of switch to avoid accidentally shorting V+. Only connect SIG and GND pins on the BlackBox. | | {{:docs:exclamation.png?120|}} | **IMPORTANT WARNING**: Note: Incorrect wiring can short V+ to GND causing damage to your controller: Double check wiring before powering on. We recommend using 2-core wiring only for this type of switch to avoid accidentally shorting V+. Only connect SIG and GND pins on the BlackBox. |
  
 +> Make sure to set $5=7 to use Normally Open switches with grblHAL on the BlackBox X32
  
 If you need a more EMI proof solution, consider upgrading to [[https://openbuildspartstore.com/xtension-limit-switch-kit/|OpenBuilds Xtension Limit Switches]] If you need a more EMI proof solution, consider upgrading to [[https://openbuildspartstore.com/xtension-limit-switch-kit/|OpenBuilds Xtension Limit Switches]]
docs/blackbox-x32/connect-micro-limit.1661364148.txt.gz ยท Last modified: 2024/08/05 15:15 (external edit)

Page Tools

All works Copyright © by OpenBuilds®, LLC
All rights reserved. This Documentation or any portion thereof including but not limited to (menu structures, images, layout, videos, graphical artwork, logos, names, trademarks, etc.) may not be reproduced or used in any manner whatsoever without the express written permission of OpenBuilds, LLC