Differences

This shows you the differences between two versions of the page.

--- docs:blackbox-x32:connect-dewalt-iotrelay [2022/08/19 17:41]
127.0.0.1 external edit
+++ docs:blackbox-x32:connect-dewalt-iotrelay [2024/08/05 15:15] (current)
@@ Line 6: / Line 6: @@
   M5 ; Turn Spindle Off
-If you would like to use both a Laser, and the IoT relay, See: [[docs:blackbox-x32:iot-and-laser|Connecting both an IOT Switching Relay for a Router, and a Laser, to the BlackBox]]
 ==== 3.3.1.1 Connection Diagram ====
 >  NB: Do not plug anything else into the IoT relay (leave the Normally On and Always On sockets disconnected).  ONLY connect the Router to the Normally Off socket as shown.
-{{:docs:blackbox-x32:iotrelay.png?600|}}
+Connecting RoutER11 to the IoT Relay
+{{:docs:blackbox-x32:iotrelay-router11.png?600|}}
+Connecting Dewalt DWP611 to the IoT Relay
+{{:docs:blackbox-x32:iotrelay-dewalt.png?600|}}
 ==== 3.3.1.2 Video ====

OpenBuilds Documentation