Differences

This shows you the differences between two versions of the page.

--- docs:blackbox-x32:connect-3-wire-laser [2022/08/19 17:41]
127.0.0.1 external edit
+++ docs:blackbox-x32:connect-3-wire-laser [2024/08/05 15:15] (current)
@@ Line 1: / Line 1: @@
 ===== 3.3.2 Connecting BlackBox X32 to a 12v Laser Module =====
-> {{:docs:blackbox-x32:jumper-relayopen.png?150|}} TIP: Remove the Relay Mode jumper to prevent the relay from clicking on/off rapidly during laser operations
-If you would like to use both a Laser, and the IoT relay, See: [[docs:blackbox-x32:iot-and-laser|Connecting both an IOT Switching Relay for a Router, and a Laser, to the BlackBox]]
 {{:docs:blackbox-x32:3-wire-laser.png?1024|}}

OpenBuilds Documentation