docs:blackbox-4x:currentadjustment

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
docs:blackbox-4x:currentadjustment [2024/09/26 18:52]
admin
docs:blackbox-4x:currentadjustment [2024/09/26 18:53] (current)
admin
Line 13: Line 13:
   * Careful to not overturn the potentiometers and damage them. They sweep only the 270 degree chunk shown in print on the front.   * Careful to not overturn the potentiometers and damage them. They sweep only the 270 degree chunk shown in print on the front.
  
-> **Note:**  Pay attention to the Red {{fa> <font inherit/inherit;;#c0392b;;inherit>exclamation|Exclamation</font> }} Exclamation Mark LED below each axis's Current Adjustment Potentiometer: if the driver experiences any fault it will shut down and turn on the LED.+> **Note:**  Pay attention to the 
 + <font inherit/inherit;;#c0392b;;inherit>Red</font>  {{fa>exclamation|Exclamation}} Exclamation Mark LED below each axis's Current Adjustment Potentiometer: if the driver experiences any fault it will shut down and turn on the LED.
  
 === Fault Indicators === === Fault Indicators ===
docs/blackbox-4x/currentadjustment.1727376769.txt.gz · Last modified: 2024/09/26 18:52 by admin