Included are the two posts (Inch and Millimeter) that RhinoCAM 2024 and VisualCAD/CAM 2024 customers can use.

Please follow these steps to install your customized post processor for use with your product version

• Unzip the downloaded Post Processors archive.
• Use the Windows File explorer to go to your Program Data folder. This is typically called ProgramData and you can find it on your system drive - usually the C:\ drive. This folder is hidden, so you’ll only see it if you show hidden files set in your operating system.
• Now go to ProgramData/MecSoft Corporation/2024 product/POSTS/MILL/SPM/ folder
• Copy the unzipped files (SPM files) to this folder
• Bring up your product and you should be able to use your customized post-processor in the list of available posts.