Table of Contents
2.7 Switched Output
The Switched Outputs are are used to switch the incoming power supply voltage out to a device. It can be switched on/off or controlled with PWM (Pulse Width Modulation)
Make sure any devices powered off the switch output have the correct voltage rating to match your DC power supply, and does not use more than 2A of current.
- Max Current: 2A
- Voltage: 12-30v (Same as Input voltage)
- Suitable for inductive loads
2.7.1 Wiring
| BLOX Terminal | Device |
| GND | Low side Switched leg |
| V+ | 12-30V (Connected to input power supply positive) |
| Switched Output Example: Motors / LEDs | Switched Output Example: Relays | Switched Output Example: IoT Relay / Solenoid |
 |  |  |